Worth knowing
Resistance
The years have shown that considering several decisive criteria (resistance, optical effect, earning power, suitability for repair) the natural material wood is most suitablefor felt-golf courses. To get a long term weather resistance the wood is handled with high pressure impregnation.
Degree of difficulty
In the first place, the degree of difficulty of the felt-golf courses depends on the type of lanes chosen. The types of lanes vary in length, width and selection of obstacles. In order to make felt-golf interesting to the same extent for both occasional and more ambitious players and realize this on one course, our felt-golf courses are equipped with adjustable obstacles. Therefore every player or group of players is able to decide himself by a simple manipulation, whether the individual obstacle should be more difficult or easier to play. This possibility, furthermore, creates an ideal precondition for families with bag and baggage to play the course.
Maintenance
All materials used in the construction of FUN-SPORTS felt-golf courses are
especially weather resistant. It is not necessary to cover the lanes during
the winter months.
Compared with the usual course systems there is a remarkable advantage due
to the lateral water outlets and the special ventilation underneath the construction:
The courses do not have to be freed from water after rainfalls, but they will
be drying all alone very quickly. Only removing dead leaves, for example,
remains inevitable as it is the case with other course systems too in order
to present the course in an inviting condition.
Service
FUN-SPORTS offers its extensive experience to your disposal, resulting from
more than 25 years in the minigolf business, planning and installing minigolf
courses.
As a special support FUN-SPORTS offers you consulting for opening the course
and in the first phase of operation, in order to help the operator making
the project to achieve the desired economic success.
It goes without saying that FUN-SPORTS offers you a wide range of accessories,
in which everything you need for successfully operating a minigolf course
is contained. Worth mentioning here are from our own production the plastic-coated,
coloured clubs for public, as well as the balls for public with differing
features that can be co-ordinated with your course as single balls or as a
set.
On request, FUN-SPORTS will arrange for the operator the acceptance of the
felt-golf course by the competent sport association as an approved course.
This can be used by the operator as an additional sign of quality for his
PR measures.
In the frames of continuous support for the minigolf courses in operation,
FUN-SPORTS has developed a service concept for different events and purposes.
Attractive innovations affect by increasing turnover and improving the rentability.
FUN-SPORTS felt-golf courses type A |
|||
This type is the standard system of felt courses.
It is meant to be assembled on even or terraced areas.
The lanes are delivered to the site in sections for assembly directly at the area. The green "Golf-tex" carpet can be glued on the fairway in one piece during the assembly or in sections at the factory, which keeps completely transportable. Provided that they have been assembled according to the instructions, the courses can be inspected and approved as first class competition courses. |
|||
9 lanes |
12 lanes |
18 lanes |
|
Recommended space in m2 |
600-900 |
700-1200 |
1200-1800 |
Total length of 18 lanes |
97 metres |
124 metres |
184 metres |
Number of greens |
6
|
6
|
11
|
Number of additional greens (optional) |
3
|
4
|
5
|
Tee-off place of wood 1 x 2 m |
included
|
included
|
included
|
Tee-off plate in stainless steel |
included
|
included
|
included
|
"Golf-tex" playing surface, 5 mm, green colour |
included
|
included
|
included
|
Extra obstacles for competition | included | included | included |
Fibrecement plates under the carpet | included | included | included |
Finishing of the obstacles / acryl lacquer / two layers / two colours | included | included | included |
Finishing of the frames / paint or acryl lacquer / two layers / three colours | included | included | included |
FUN-SPORTS felt-golf courses type A fullfill rules
and standards of the "World Minigolfsport Federation"
|
FUN-SPORTS felt-golf courses type
B
|
||||
This course is the "smaller edition" of
the standard felt course. It used on smaller areas and meant to be assembled
on even or terraced areas.
The course is basically constructed in the same way as the type A courses, utilising the same type of obstacles but it is different in length and width of the fairways. These courses are recommended for camping sites, holiday camps, hotels, schools, hospitals and convalescense homes, recreation areas, sport centres and so on. |
||||
6 lanes | 9 lanes |
12 lanes |
18.lanes |
|
Recommended space in m2 | 250- 400 | 300- 600 |
700-1200 |
1000-1800 |
Total length of fairways | 46 metres | 66 metres |
84 metres |
130 metres |
Number of greens | 4 | 6 |
6
|
11
|
Tee-off plate in stainless steel | included | included |
included
|
included
|
"Golf-tex" playing surface, 5mm, green colour | included | included |
included
|
included
|
Fibrecement plates under the carpet | included | included | included | included |
Finishing of the obstacles / acryl lacquer / two layers
/ two colours |
included | included | included | included |
Finishing of the frames / paint or acryl lacquer / two layers
/ three colours |
included | included | included | included |
Because of smaller measurements than in type A these
courses are according to the international rules not permitted for championships.
But they sure make a lot of fun!
|